EPEVER RTU 2G A GPRS Transmission Terminal
EPEVER RTU 2G A GPRS Transmission Terminal
EPEVER RTU 2G A is a new wireless data transmission terminal based on the GPRS network
EPEVER RTU 2G A is a new wireless data transmission terminal based on the GPRS network. With the GSM/GPRS SIM card, the connected devices can easily access the EPEVER cloud server to realize remote, wireless, and networked communication. EPEVER RTU 2G A is suitable for EPEVER solar controller, inverter, and inverter/charger.
| Model | EPEVER RTU 2G A | ||
| Network type | GPRS class12 | ||
| Coding method | CS1 – CS4(Comply with SMG31bis) | ||
| Frequency | GSM850/EGSM900/DCS1800/PCS1900MHz | ||
| GPRS transmission rate | 85.6kbps | ||
| Network protocol | TCP/UDP/FTP/PPP/DNS | ||
| SIM card voltage | 3V/1.8V | ||
| Antenna connector | 50Ω IPX connector | ||
| Serial port level type | RS485 | ||
| Serial port baud | 9600~115200bps | ||
| Power | DC: 9~ 60VDC or 5VDC | ||
| Power consumption | Communication: <200mA/5V; Idle: <40mA/5V | ||
| Environment temperature | -40~85℃ | ||
| Humidity | 0~95%(Non-condensing) | ||
| Electromagnetic compatibility | Electrostatic discharge immunity test, level 3 Anti-interference test, level 3 |
EPEVER-DATASHEET_ EPEVER RTU 2G A
EPEVER-DATASHEET_ EPEVER RTU 2G A
EPEVER RTU 2G A-Manual-EN-V3.2
EPEVER RTU 2G A-Manual-EN-V3.2
Product Highlights
Extensive network coverage and flexible networking
Low operating costs (charged by network flow)
Adopt a DB9 male terminal
Embedded in Modbus RTU protocol
Automatic restore after disconnection
Support RS485 communication
Reviews
There are no reviews yet.