Products

It is ok, as long as the ventilation conditions are good.

13 July 2021
Can inverter be installed horizontally?
[…]
13 July 2021
Can the two Load output ports be connected in parallel so that a heavier load can be powered?
[…]
13 July 2021
Can Load1 and Load2 be set with different output voltage , e.g., one with 12V and the other with 24V? Can such setting be performed when the unit is on?
[…]
13 July 2021
How to enter into the No-battery mode and what should I pay attention to in No-battery mode?
[…]
13 July 2021
Why constant voltage output is needed?
[…]
13 July 2021
What is constant voltge output?
[…]
13 July 2021
What are the accessories?
[…]
13 July 2021
What is the advantage of 2.4G communication comparing with IR?
[…]
13 July 2021
How to choose the controller according to the LED lamp?
[…]
13 July 2021
The default baud rate of the controller is 115200bps. Can I change it to 9600bps?
[…]
13 July 2021
What is the Max. PV power of the charger?
[…]
13 July 2021
How to set the Load working mode and control parameters?
[…]
13 July 2021
How does "Test mode" work?
[…]
13 July 2021
What is the rated current of the USB output? Would it be damaged if overloaded?
[…]
13 July 2021
What are the load working mode options?
[…]
13 July 2021
What is the Max. output voltage and current on Load terminal?
[…]
13 July 2021
What is the purpose of the button cell? Is it mandatory?
[…]
13 July 2021
What is 'External Switch Port' used for and how to use it?
[…]
13 July 2021
Can all parameters be set on the LCD and buttons?
[…]
13 July 2021
Does IP-Plus support Li(NiCoMn)O2 battery?
[…]
13 July 2021
Can output voltage and frequency be set while the unit is powered on?
[…]
13 July 2021
Does it come with input polarity reverse protection?
[…]
13 July 2021
Do I need to connect external voltge sensor to the controller if voltage sampling is need?
[…]
13 July 2021
Why is remote voltage sampling needed?
[…]
13 July 2021
What is purpose of remote voltage sampling?
[…]
13 July 2021
Where can GoMate be installed?
[…]
13 July 2021
What does 'H' mean on the LED dispaly?
[…]
13 July 2021
Can EPIPDB-COM connect with WiFi or Bluetooth modules?
[…]
13 July 2021
What battery type does EPIPDB-COM support? Can it connect one battery bank only?
[…]
13 July 2021
Can two batteries have different rated voltage and battery type?
[…]
13 July 2021
Do both Bat1 and Bat2 support lithium battery?
[…]
13 July 2021
Does it matter to connect Bat1 first or Bat2 first?
[…]