HPS-AHL Series(1000~2500W) Home Battery Backup
HPS-AHL: Your efficient home battery backup. Supports multiple charging sources, optimizes energy usage, and enhances solar power systems.
The HPS-AHL series offers advanced home battery backup with LiFePO4 lithium battery, supporting utility, generator, and solar charging. It features responsive DSP control, multiple modes, and Modbus communication. With optimized MPPT tracking, it maximizes solar energy usage. Efficient AC to DC conversion and DC to AC inverting power household appliances and electronics. Multiple DC outputs, including USB-C ports for fast charging, enhance versatility. This high-quality, reliable system improves solar power supply efficiency, providing flexible energy solutions for homes.
| Model | HPS1022-AHL0210 | HPS1522-AHL0310 | HPS2522-AHL0610 | |
| Utility Input | Utility Rated Voltage | 220VAC | ||
| Utility Voltage | 200~240VAC | |||
| Failure Voltage | 290VAC | |||
| Utility Frequency | 50Hz/60Hz | |||
| Utility Maximum Work Current (Charging + Bypass) |
7A@220VAC | 10A@220VAC | 15A@220VAC | |
| Switch Response Time | Switch Response Time-Utility to Inverter: ≤20ms Switch Response Time-Inverter to Utility: ≤20ms |
|||
| AC Input Overload Relay | HAVE | |||
| Inverter Output | Inverter Rated Power (@25℃) | 1000W | 1500W | 2500W |
| 4-second Transient Surge Output Power | 1800W | 2700W | 4500W | |
| Inverter Output Voltage | 220VAC±3% | |||
| Inverter Frequency | 50Hz/60Hz±0.2% | |||
| Output Voltage Waveform | Pure sine wave | |||
| Output Voltage Harmonic Distortion Rate | ≤3% (Resistive load) | |||
| Output Gradual Start | HAVE | |||
| Solar Controller | PV Maximum Input Withstand Voltage | 95VDC (at minimum operating environment temperature) | ||
| Solar Controller Type | MPPT | |||
| MPPT Maximum Efficiency | ≥99.5% | |||
| MPPT Voltage Range | 24~76VDC | |||
| MPPT Input Channels | One way | |||
| PV Maximum Charging Current | 20A | 30A | 60A | |
| Battery | Battery Type | LFP8S2P | LFP8S3P | LFP8S1P |
| Battery Rated Capacity | 40Ah | 60Ah | 100Ah | |
| Cell Dimension | Diameter: 40.0+0.5/-0mm Height: 136.25±0.5mm |
Diameter: 40.0+0.5/-0mm Height: 136.25±0.5mm |
Length: 160.0±0.8mm Height: 118.5±0.5mm Width: 50.1±0.5mm |
|
| Battery Rated Voltage | 25.6VDC | |||
| Maximum Continuous Charging Current | 1C | |||
| Maximum Continuous Discharging Current | 1.8C | 1.8C | 1C | |
| Battery Work Voltage Range | 21.0VDC~30.0VDC | |||
| Battery Work Temperature Range | Discharging Mode: -20℃~50℃ Charging Mode: 0℃~50℃ |
|||
| Cycle Times | 2000 times¹ | 2000 times¹ | 5000 times² | |
| DC Output | 12V DC Output (x2) | 12V⎓2A, Max. 24W/port, Total 48W | ||
| USB-A Output (x2) | 5V⎓3A, Max. 15W/port, Total 30W | |||
| USB-C Output (x1) | 5V⎓3A, Max. 15W | |||
| USB-C Output (x1) | 5/9/12/15V⎓3A, 20V⎓5A, Max. 100W | |||
| DC Output Switch | HAVE | |||
| Others | Work Temperature Range | -20℃~50℃³ (when the environment temperature exceeds 30℃, the charging power and load power will be reduced appropriately; working of full load is not supported.) | ||
| Enclosure | IP30 | |||
| Communication Method | Bluetooth, RS485 (WiFi optional) | |||
| LCD | Monochrome LCD, English interface | |||
| Warranty | Two years | |||
| Dimension (Length x Width x Height) |
385x307x345mm (with floor mats and handles) | 385x307x345mm (with floor mats and handles) | 427x325.4x368mm (with floor mats and handles) | |
| Net Weight | 20.0kg | 24.0kg | 37.0kg | |
1. 25±2℃, charging at 0.5C, discharging at 1C, 90%DOD (SOC range: 100%~10%), cycle to 80% of nominal capacity.
2. 25±2℃, charging at 0.5C, discharging at 0.5C, capacity≥80%.
3. The actual output power is reduced with the temperature: From 30℃ to 50℃; the actual output power will be reduced by 5% for each 1℃ increase.
Manual
EPEVER-Manual-HPS-AHL-Series
DataSheet-HPS1022-AHL0210
EPEVER-DataSheet-HPS1022-AHL0210
DataSheet-HPS1522-AHL0310
EPEVER-DataSheet-HPS1522-AHL0310
DataSheet-HPS2522-AHL0610
EPEVER-DataSheet-HPS2522-AHL0610
Product Highlights
Excellent dust-proof performance with separate compartment design
Built-in LiFePO4 lithium battery
Intuitive display of battery SOC via 5-bar indicator lights
Multiple DC output ports (5VDC/3A ports, 12VDC/2A ports, Type C ports)
Build-in bluetooth module
Large-sized LCD screen to monitor and modify system parameters
Optional 4G or WiFi module to remote control the inverter/charger by the RS485 com. port
AC input overload relay for disconnecting from the grid when the fault occurs
Circuit breaker on PV input for equipment safety
Circuit breaker on battery output for battery safety
AC charging with PFC technology, high power factor for efficient energy consumption
Bidirectional high-frequency transformer isolation topology
Advanced MPPT technology: maximum tracking efficiency≥99.5%
EMC design on AC output to avoid interference with AC load
Long-term continuous operation at full power
Pure sine wave output
Comprehensive electronic protection
Reviews
There are no reviews yet.